Overhead Crane 10 Ton Set

Overhead Crane 10 Ton Set

The common bridge type crane mainly adopts electric power drive, which is usually operated in the driver's room and has long distance control. The weight can reach five hundred tons and the span is up to 60 meters.

Send InquiryChat Now
Product Details

overhead crane 10 ton set

Product Features:

The common bridge type crane mainly adopts electric power drive, which is usually operated in the driver's room and has long distance control. The weight can reach five hundred tons and the span is up to 60 meters.

The simple beam bridge crane is also called the sorghum crane. Its structure is similar to the common bridge type crane, and the lifting weight, the span and the working speed are small. The main girder of the bridge is a simple section beam consisting of I-beam or other steel and plate steel. The hoist is equipped with a hand hoist or an electric hoist and a simple car as a lifting car. The car generally runs on the lower flange of the I-beam. The bridge can run along the track on the elevated frame, and it can also run along the track under the overhead frame. This kind of crane is called a hanging crane.

Metallurgical special overhead traveling crane can participate in the specific process operation in the steel production process. Its basic structure is similar to the ordinary bridge crane, but there are special working mechanisms or devices on the lifting car. The working characteristics of this kind of crane are frequent use, bad conditions and high working level. There are five main types. Casting crane: for lifting molten iron into the mixer furnace, furnace and hoisting molten steel continuous casting device or ingot molds used. The main trolley filled bucket, side car to flip bucket and other auxiliary work.

Clamp crane: the use of clamps will be vertically lifted onto the high temperature of ingot in soaking pit, or to transport it out into theingot car.

An ingot crane: used to force the ingot out of the ingot mould. The car has a special stripping device, a stripping mode is determined according to the shape of ingot stripping crane: some utility lever presses down the ingot, with tongs filed ingot mold; some with large clamp on the ingot mold with clamp lift ingot.

The charging crane used to charge to open hearth furnace. The lower end of the column with the main trolley rod, to stir up material box and put it into the furnace. The main column can rotate around the vertical axis, and the rod can swing up and down. The auxiliary car is used to repair the auxiliary operation of the furnace.

Forging crane: for forging large workpieces with hydraulic press. A special flip chip device is suspended from the hoisting hook of the main car to support and flip the workpiece; the auxiliary car is used to lift the workpiece.

Specification:

111.png

8.jpg17.jpg


Hot Tags: overhead crane 10 ton set,
Related Products
Inquiry

Copyright © Henan Armagh Machine Equipment Co.,Ltd All Rights Reserved.