Doubel Beam Bridge Crane For 700 Ton
5-700/20 tons of electric hoist bridge type crane is suitable for internal or outdoor sites in industry and mining. In handling, fixed inter transport materials and articles.
Doubel beam bridge crane for 700 ton
700/20 tons of electric hoist bridge type crane is suitable for internal or outdoor sites in industry and mining. In handling, fixed inter transport materials and articles. The crane uses 380 volts and 50 hertz. The main performance parameters can be referred to the data contained in the total diagram of the crane's additional drawings.
The structural form of 5-700/20 ton electric bridge crane (see attached drawings for cranes) is mainly composed of a bridge frame, a cart running mechanism and a trolley equipped with lifting and running mechanisms. The main beam is laid on the rail of the trolley. The outside of the two main beam is equipped with a walking platform. One side is set up for the installation and maintenance of the running mechanism of the big car. The other side is set up for the installation of a small car conducting device.
A full field control room is hung under the main girder. There is a linkage control console or a single controller in the control room. The control room and the walking table are equipped with an inclined ladder, and the main girder is connected to the two ends of the beam with two ends in the middle. The running mechanism of the big car adopts the separate drive form.
The wheel of the crane is four, from more than 50 tons to 100 tons, with eight wheels, and the angular bearing boxes with rolling bearings are assembled at both ends of the end beam.