10 Ton Electric Factory Overhead Bridge Crane
10 tons hook bridge crane's use 1), the power opens and closes: insert the power key into the safety keyhole of the operation button box and turn to the open position, otherwise, it will turn off the power supply.
10 ton electric factory overhead bridge crane
10 tons hook bridge crane's use 1), the power opens and closes: insert the power key into the safety keyhole of the operation button box and turn to the open position, otherwise, it will turn off the power supply. 2), the crane starts: press the start button crane on the control button box and enter the start running state. 4), crane drive speed conversion: the operator can slow down the slow and fast switch on the button box to the slow or fast position according to the situation, and the driving speed of each crane can achieve fast and slow transformation. 5), the control hook direction: long press button control box on the move left or right lifting or descending button can realize lifting or lifting hook to move forward or backward; press the button can make the cart forward or after driving to achieve hook forward or backward; press the right / left button to make the car to the left right or left or right hook to achieve driving. 6), the use of the emergency button: operators should press the red emergency button in time when operating the crane, if there is any emergency or danger, then all the driving mechanisms of the crane will stop running to avoid dangerous situations. After the emergency or dangerous situation is excluded, the emergency button is pulled up and the green start button is pressed. The crane will reenter the starting state. 7), the reset of control switch: when the control switch is mistakenly operated during operation, if it is not correctly activated or disconnected, the switch reset button should be pressed to make the control switch work correctly.