Overhead Ladle Crane 100t

Overhead Ladle Crane 100t

LDY type metallurgical electric single-girder crane (hereinafter referred to as crane) is a space transportation tool used with YHII type electric hoist designed according to the JB/T1306-2008 standard and meeting the quality inspection office special [375] number document, the main role is to intermittent , Cycle work methods, through the lifting hook or other device for the timely and rapid completion of the metallurgical production required lifting the weight of the transport and transport, modern industrial enterprises in the metallurgical and Important tools and equipment to increase labor productivity at the casting site.

Send InquiryChat Now
Product Details

overhead ladle crane 100t

I. Overview

This manual is applicable to the installation, use and maintenance of LDY metallurgical electric single girder cranes for installation, operation and maintenance personnel.


1. Main use of LDY metallurgical electric single beam crane

LDY type metallurgical electric single-girder crane (hereinafter referred to as crane) is a space transportation tool used with YHII type electric hoist designed according to the JB/T1306-2008 standard and meeting the quality inspection office special [375] number document, the main role is to intermittent , Cycle work methods, through the lifting hook or other device for the timely and rapid completion of the metallurgical production required lifting the weight of the transport and transport, modern industrial enterprises in the metallurgical and Important tools and equipment to increase labor productivity at the casting site.


2. Application scope of LDY type metallurgical electric single beam crane

The LDY crane is suitable for working at working level A6, working environment temperature ≤ 60°C, relative humidity ≤ 85%, altitude less than 2000m, and working under non-corrosive medium environmental conditions.


3, LDY metallurgical electric single beam crane environmental conditions

(1) The electric single girder crane has a three-phase AC power supply with a rated frequency of 50 Hz and a rated voltage of 380 V (if the power supply voltage and frequency are different from this requirement, the supply voltage and frequency of the place of use shall be specified when ordering). The upper limit of allowable voltage fluctuations on motor and electrical control equipment is +10% of rated voltage, and the lower limit (at peak current) is -15% of rated voltage. The internal voltage loss of the crane is 5%.


(2) Crane working environment: temperature ≤ 60°C, humidity ≤ 85%, altitude less than 2000m, no fire, explosion hazard, corrosive medium. The noise crane shall be measured on the ground in a non-hermetic building with no other noise disturbance and lifting height not less than 5m. The noise of the complete machine shall not exceed 85 dB(A) when the lifting weight Q≤5t, and the lifting weight Q The noise of the whole machine is not more than 90 dB(A) when ≥5t

11.3 (2).jpg

12.1.png

5.jpg

Hot Tags: overhead ladle crane 100t,
Related Products
Inquiry

Copyright © Henan Armagh Machine Equipment Co.,Ltd All Rights Reserved.